Product Center

Helping the economic growth of China and the world with high-quality products has become an important force in the pump industry.

+
  • MAHHH.jpg

M AH HH Slurry Pump

M, AH, HH pumps are cantilever, horizontal centrifugal slurry pumps. It is suitable for conveying strong abrasive and high-concentration slurries in metallurgy, mining, coal, electric power, building materials and other industrial sectors. This type of pump can also be used in multiple stages in series.

hiddenValue

  • Description
  • Model Description

    For example: 10/8ST - AH (or M,HH)

    10——Pump inlet diameter (inch)

    8——Diameter of pump outlet (inch)

    HH——High lift slurry pump

    M, AH - slurry pump

    ST - bracket form

    The main purpose

    M, AH, HH pumps are cantilever, horizontal centrifugal slurry pumps. It is suitable for conveying strong abrasive and high-concentration slurries in metallurgy, mining, coal, electric power, building materials and other industrial sectors. This type of pump can also be used in multiple stages in series.

    The pump body of the M and AH pumps has a replaceable metal lining or rubber lining, and the impeller is made of wear-resistant metal or rubber. The pump body lining and impeller of HH pump are made of wear-resistant metal.

    The shaft seals of M, AH and HH pumps can be packing seals or centrifugal seals. The position of the outlet of the pump can be installed at 45° intervals and rotated at eight different angles according to the needs.

    Introduction to selection

    Referring to the performance curve of the pump, the selected flow range should be:

    ◆M, AH type pump:

    For high concentration and strong corrosive slurry, the flow rate range is 40%~80%

    The flow range of medium concentration and medium corrosive slurry is 40%~100%

    For low concentration, low corrosive slurry flow range is 40%~120%

    ◆HH type pump:

    The flow range of medium concentration and medium corrosive slurry is 40%~80%

    For low concentration, low corrosive slurry flow range from 40% to 100%

    (The highest efficiency point at a certain speed corresponds to a flow rate of 100%)

    Performance parameter table

    Model Allowed to be equipped with maximum power (KW) Material Clear water performance   Impeller Curve number
    Jacket Impeller Flow Q Head(m) Speed(r/mm) Maximum efficiency% Cavitation flow Number of leaves Impeller diameter (mm)
    (m³/h) (I/S)
    1½/1B-AH 15 M M 12.6-28.8 3.5-8 6~68 1200-3800 40 2~4 5 152 WPA151B01
    1½ /1C-HH 15 RU RU 10.8-25.2 3~7 7~52 1400-3400 35 2~4 3 152 WPA151B02A
    2/1½ B-A 30 M M 16.2-34.2 4.5~9.5 25-92 1400-2200 20 2-5.5 5 330 WPA151E01
    2/112B-AH 15 M M 32.4-72 9~20 6~58 1200-3200 45 3.5-8 5 184 WPA215B01
    2/1 2 B-AH 15 RU RU 25.2-54 7~15 5.5-41 1000-2600 50 2.5-5 5 178 WPA215B02
    3/2C-AH 30 M M 39.6-86.4 11~24 12-64 1300-2700 55 4~6 5 214 WPA32A01
    3/2C-AH 30 RU RU 36-75.6 10~21 13-39 1300-2100 55 2~4 5 213 WPA32A01A
    3/2D-HH 60 M M 68.4-136.8 19-38 25-87 850-1400 47 3-7.5 5 457 WPA32E01
    4/3C-AH 30 M M 86.4-198 24-55 9~52 1000-2200 71 4~6 5 245 WPA43A01
    4/3D-AH 60 M M 86.4-198 24-55 9~52 1000-2200 71 4~6 5 245 WPA43A01
    4/3C-AH 30 RU RU 79.2-180 22-50 5-34.5 800-1800 59 3~5 5 245 WPA43A01A
    4/3D-AH 60 RU RU 79.2-180 22-50 5-34.5 800-1800 59 3~5 5 245 WPA43A01A
    4/3C-AH 30 M M 97.2-194.4 27-54 9~53 1000-2200 55   3 240 WPA43A02
    4/3D-AH 60 M M 97.2-194.4 27-54 9~53 1000-2200 55   3 240 WPA43A02
    4/3E-HH 120 M M 126-252 35-70 12-97 600-1400 50 2~5 5 508 WPA43E01
    6/4D-AH 60 M M 162-360 45-100 12-56 800-1550 65 5~8 5 365 WPA64A01
    6/4E-AH 120 M M 162-360 45-100 12-56 800-1550 65 5~8 5 365 WPA64A01
    6/4D-AH 60 M M 180-396 50-110 7~61 600-1600 55 3~8 4 372 WPA64A02
    6/4E-AH 120 M M 180-396 50-110 7~61 600-1600 55 3〜8 4 372 WPA64F02
    6/4D-AH 60 RU RU 144-324 40-90 12-45 800-1350 65 3~5 5 365 WPA64A03A
    6/4E-AH 120 RU RU 144-324 40-90 12-45 800-1350 65 3~5 5 365 WPA64A03A
    6/4D-AH 60 M M 144-324 40-90 10-52 800-1600 55 4.5-9 2 371 WPA64A04
    6/4E-AH 120 M M 144-324 40-90 10-52 800-1600 55 4.5-9 2 371 WPA64A04
    6/4D-AH 60 M M 162-360 45-100 21-64 1000-1600 55   2 371 ESY7996
    6/4E-AH 120 M M 162-360 45-100 21-64 1000-1600 55   2 371 ESY7996
    6/4D-AH 60 M M 126-288 35-80 10-55 800-1600 58 2-2.5 2 356 ESY7997
    6/4E-AH 120 M M 126-288 35-80 10-55 800-1600 58 2-2.5 2 356 ESY7997
    6/4S-HH 560 M M 324-720 90-200 30-118 600-1000 64 3~8 5 711 WPA64E01M
    6S-H 560 M M 468-1008 130-280 20-94 500-1000 65 4~12 5 711 WPA66A91
    8/6E-AH 120 M M 360-828 100-230 10-61 500-1140 72 2~9 5 510 WPA86A01
    8/6R-AH 300 M M 360-828 100-230 10-61 500-1140 72 2~9 5 510 WPA86A01
    8/6E-AH 120 RU RU 324-720 90-200 7~49 400-1000 65 5~10 5 510 WPA86A01B
    8/6R-AH 300 RU RU 324-720 90-200 7~49 400-1000 65 5~10 5 510 WPA86A01B
    8/6E-AH 120 M M 360-828 100-230 7~70 400-1140 70 3~6 8 536 WPA86A02
    8/6R-AH 300 M M 360-828 100-230 7~70 400-1140 70 3~6 8 536 WPA86A02
    8/6E-AH 120 M M 360-828 100-230 7~52 400-1000 70 2.5-6 4 536 WPA86A02
    8/6R-AH 300 M M 360-828 100-230 7~52 400-1000 70 2.5-6 4 536 WPA86F03
    8/6E-AH 120 M M 288-648 80-180 5~47 400-1100 60 3~6 2 510 ESY7998
    8/6R-AH 300 M M 288-648 80-180 5~47 400-1100 60 3~6 2 510 ESY7998
    8/6T-HH 1200 M M 576-1152 160-320 32-95 450-725 65 6~10 5 965 WPA86E01
    10/8E-M 120 M M 540-1228 150-340 15-61 600-1100 70 4.5-8 4 549 WPA108B01
    10/8R-M 300 M M 540-1228 150-340 15-61 600-1100 70 4.5-8 4 549 WPA108B01
    10/8E-M 120 M M 504-1080 140-300 18-66 700-1100 62 4.5~7.5 4 549 WPA108B02
    10/8R-M 300 M M 504-1080 140-300 18-66 700-1100 62 4.5~7.5 4 549 WPA108B02
    10/8E-M 120 M M 666-1440 185-400 14-60 600-1100 73 4~10 5 549 WPA108B03
    10/8R-M 300 M M 666-1440 185-400 14-60 600-1100 73 4~10 5 549 WPA108B03
    10/8E-M 120 RU RU 540-1188 150-330 10-42 500-900 79 5~9 5 549 WPA108B03A
    10/8R-M 300 RU RU 540-1188 150-330 10-42 500-900 79 5~9 5 549 WPA108B03A
    10/8ST-AH 560 M M 612-1368 170-380 11-61 400-850 71 4~10 5 686 WPA108B01AM
    10/8ST-AH 560 RU RU 9540-1188 150-330 12-50 400-750 75 4~12 5 686 WPA108B02M
    12/10ST-AH 560 M M 936-1980 260-550 7~68 300-800 82 6 5 762 WPA1210A01M
    12/10ST-AH 560 M M 720-1620 200-450 7~45 300-650 80 2.5~7.5 5 762 WPA1210A03AM
    14/12ST-AH 560 M M 1260-2772 350-770 13-63 300-600 77 3~10 5 965 WPA1412A01M
    14/12ST-AH 560 RU RU 1152-2520 320-700 13-44 300-500 79 3~8 5 965 WPA1412A01AM
    16/14SU-AH 560 M M 1368-3060 380-850 11-63 250-550 79 4~10 5 1067 WPA1614A01
    16/14TU-AH 1200 M M 1368-3060 380-850 11-63 250-550 79 4~10 5 1067 WPA1414A01
    16/14ST-AH 560 M M 1699-3798 472-1055 14-75 250-550 75 4.5-6 8 1067 ESY7771
    16/14TU-AH 1200 M M 1699-3798 472-1055 14-75 250-550 75 4.5-6 8 1067 ESY7771
    18/16ST-AH 560 M M 2160-5040 600-1400 8~66 200-500 80 4.5-9 5 1245 ESY6544
    18/16TU-AH 1200 M M 2160-5040 600-1400 8~66 200-500 80 4.5-9 5 1245 ESY6544
    20/18TU-AH 1200 M M 2520-5400 700-1500 13-57 200-400 85 5~10 5 1370 WPA2018A01

    Note:

    1.RU stands for rubber material, M stands for alloy wear-resistant material.

    2. The recommended flow range is 50%Q' ≤Q≤110%Q' (Q* corresponds to the flow rate at the highest efficiency point)

    3. NPSH refers to the NPSH value corresponding to the recommended Q point at the highest speed.

    Structure diagram

    1. VOLUTE LINER 2.FRAME PLATE 3.BACK LINER
    4.COVER PLATE 5.FRONT LINER 6.IMPELLER
    7.STUFFING BOX 8.SHAFT SLEEVE 9. SHAFT
    10.BEARING HOUSING 11.BASE 12.GUEASE CUP
    13.SPLIT PACKING GLAND 14.EXPELLER 15.EXPELLER RING
    16.PACKING 17.ILANTERN RING 18.LIP SEAL

     

    1.FRAME PLATE 2.EXPELLER RING 3.PACKING GL AND
    4.SHAFT SEAL‘O’ RING 5.SHAFT SPACER 6.EXPELLER
    7.FRAME PLATE LINER  8.THROAT BUSH 9.IMPELLER
    10.COVER PLATE LINER 11.COVER PLATE  

     

    M-AH-HH型渣浆泵

    TYPE A B c D U E F G H J K L M N V
    1½1 B-AH 583 295 248 197 28 79 206 181 98 171 46 143 254 181
    1½1C-HH 759 406 311 254 42 121 306 270 194 254 11 175 356 252
    2/1½B-AH 592 295 248 197 28 79 217 205 114 184 33 143 254 184
    3/2C-AH 768 406 311 254 42 121 281 238 138 210 71 175 356 233
    3/2D-HH 986 492 364 330 65 164 389 384 254 368 51 213 432 298
    4/3C-AH 843 406 311 254 42 121 354 292 149 262 24 175 356 270
    4/3D-AH 943 492 364 330 65 164 353 292 149 262 100 213 432 279
    4/3E-HH 1240 622 448 457 80 222 492 492 330 432 257 546 381
    6/4D-AH 1021 492 364 330 65 164 421 406 229 338 11 213 432 318
    6/4E-AH 1178 622 448 457 80 222 433 406 229 338 138 257 546 351
    6/4S-HH 1668 920 780 450 120 280 596 616 413 546 134 640 760 353
    8/6E-AH 1302 622 448 457 80 222 557 551 318 460 62 257 546 402
    8/6R-AH 1360 680 590 350 85 215 511 318 460 170 490 560 312
    8/6T-HH 2275 1150 1040 650 150 350 852 835 584 813 160 880 900 538
    10/8E-M 1337 622 448 457 80 222 584 613 381 470 83 257 546 403
    10/8R-M 1395 680 590 350 85 215 613 381 470 190 490 560 314
    10/8ST-AH 1748 1150 780 650 120 280 692 673 419 635 27 620 900 439
    12/10ST-AH 1816 1150 780 650 120 280 762 755 464 674 65 620 900 416
    14/12ST-AH 1873 1150 780 650 120 280 812 937 629 832 224 620 900 486
    16/14TU-AH 2320 1460 1050 900 150 350 953 1048 660 889 84 860 1200 597
    20/18TU-AH 2475 1460 1050 900 150 350 1100 1420 940 1230 420 860 1200 615
    6S-H 1700 920 780 450 120 280 622 625 415 615 155 640 796 382

     

    T S n-d Suction Flange Outlet flange Pump heavy metal Rubber
      D1 D2 n-d1 d0 d1 d2 n-d2
    38 24 4-φ14 152 38 114 4-φ16 165 25 127 4-φ16 91 77
    48 32 4-φ19 152 38 114 4-φ17 152 25 114 4-φ17 318
    38 24 4-φ14 184 51 146 4-φ19 165 38 127 4-φ19 104 118
    48 32 4-φ19 216 76 178 4-φ19 184 51 146 4-φ19 191 154
    64 38 4-φ22 216 76 178 8-φ19 203 51 165 4-φ19 750  
    48 32 4-φ19 279 102 235 4-φ22 229 76 191 4-φ22 263 236
    64 38 4-φ22 279 102 235 4-φ22 229 76 191 4-φ22 363 290
    76 54 4-φ29 254 102 210 8-φ19 254 76 210 8-φ19 1250
    64 38 4-φ22 337 152 292 4-φ22 279 102 235 4-φ22 626 454
    76 54 4-φ29 337 152 292 4-φ22 279 102 235 4-φ22 728 635
    90 70 4-φ35 337 152 292 8-φ22 305 102 260 8-φ22 2880  
    76 54 4-φ29 406 203 356 8-φ22 368 152 324 8-φ21 1473 982
    70 50 4-φ28 406 203 356 8-φ22 368 152 324 8-φ22 1655
    125 80 4-φ48 432 203 375 8-φ29 432 152 375 8-φ29 6586
    76 54 4-φ29 502 254 445 8-φ29 432 203 375 8-φ29 1625 1202
    70 50 4-φ28 502 254 445 8-φ29 432 203 375 8-φ29 1836
    125 80 4-φ48 502 254 445 8-φ29 432 203 375 8-φ29 3750 3130
    125 80 4-φ48 527 305 470 8-φ25 527 254 470 12-φ25 4318 3357
    125 80 4-φ48 585 356 521 12-φ25 552 305 495 12-φ25 6409 4672
    150 95 4-φ79 705 406 641 8-φ35 637 356 610 12-φ29 10000
    150 95 4-φ79 900 508 800 12-φ42 900 460 800 12-φ42 18864 15921
    90 70 4-φ35 380 152 320 8-φ27 420 150 360 8-φ27

    Product material

    Part Name Material name or grade Standard code
    Bearing body, bracket, pump body, pump cover of double shell pump HT200 GB 9439-88
    QT450-10. QT500-7 GB 1348-88
    ZG230-450. ZG270-500 GB/T 11352-89
    The pump body and pump cover of the impeller reverse plug and guard plate single-shell pump Wear-resistant 1#-8# GB 8263-87
    Auxiliary impeller, pressure reducing cover HT200 GB9439-88
    QT450-10. QT500-7 GB1348-88
    Stainless acid-resistant steel GB2100-80
    Wear-resistant 1#-8# GB8263-87
    Axle 45 GB699-88
    40Cr GB3077-88
    Bushing 45 (Surface Plated) GB699-88
    3Cr13 GB/T1220-92

    For materials not mentioned in the sheet, please get in touch with us. More material is available upon request.

    FEATURES 

    1. The structure is advanced.

    2. Generalization degree is high.

    3. Operation is reliable.

    4. The pump has a long service life.

    5. It is easy to assemble, disassemble and maintain.

    6. It is efficient and energy-saving.

    SCOPE OF SUPPLY

    Bare shaft pump with base, baseplate, motor (or other methods providing mechanical force),pump starter (optional)

    ORDERING INSTRUCTIONS

    When ordering (or signing a technical agreement), please provide the following information:

    1. Working condition: capacity, head, slurry concentration and proportion, particle size, suction form, transmission method, etc.

    2. Matching motor: model, main technical parameters, protection grade, manufacturer, etc.

    3. Whether pump spare parts, dedicated tools, speed control devices, etc. are required.

    4. Other special requirements.

    Keywords:
    • M AH HH Slurry Pump

Get a quote

Note: Please leave your email, our professionals will contact you as soon as possible!

Download

M AH HH Slurry Pump

M, AH, HH pumps are cantilever, horizontal centrifugal slurry pumps. It is suitable for conveying strong abrasive and high-concentration slurries in metallurgy, mining, coal, electric power, building materials and other industrial sectors. This type of pump can also be used in multiple stages in series.

68.5MB

Eaeast Pump Industry

At present, the main products of the company are: YZJ series, ZGB series, ZGF series, ZGC series, M, AH, HH series, YD series, SP series, YZJL series, YDL-L series, ZQL series, G/GH series, etc.